Axis P5676-LE User Manual page 25

AXIS P5676-LE PTZ Camera
The web interface
Contrast: Use the slider to adjust the difference between light and dark.
Brightness: Use the slider to adjust the light intensity. This can make objects easier to see. Brightness is applied after image
capture, and doesn't affect the information in the image. To get more details from a dark area, it's usually better to increase
gain or exposure time.
Sharpness: Use the slider to make objects in the image appear sharper by adjusting the edge contrast. If you increase the
sharpness, it may increase the bitrate and the amount of storage space needed as well.
Wide dynamic range
WDR : Turn on to make both bright and dark areas of the image visible.
Local contrast
dark and light areas.
Tone mapping
zero, only the standard gamma correction is applied, while a higher value increases the visibility of the darkest and brightest
parts in the image.
White balance
When the camera detects the color temperature of the incoming light, it can adjust the image to make the colors look more natural.
If this is not sufficient, you can select a suitable light source from the list.
: Use the slider to adjust the contrast of the image. A higher value makes the contrast higher between
: Use the slider to adjust the amount of tone mapping that is applied to the image. If the value is set to
25