Table of Contents
Advertisement
AXIS Q8615-E PTZ Camera
Specifications
8
Sunshield
9
Wiper
10 Front window
11 Top cover
12 Inner cover
13 Lens
14 Lid
15 Base unit
SD card slot
NOTICE
NO
NO
TICE
TICE
• Risk of damage to SD card. Don't use sharp tools, metal objects, or excessive force when inserting or removing the SD card.
Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Unmount the SD card from the device's web interface before removing it.
Don't remove the SD card while the product is running.
This device supports SD/SDHC/SDXC cards.
For SD card recommendations, see axis.com.
SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or registered
trademarks of SD-3C, LLC in the United States, other countries or both.
Buttons
Control button
The control button is used for:
•
Resetting the product to factory default settings. See Reset to factory default settings on page 65.
•
Connecting to a one-click cloud connection (O3C) service over the internet. To connect, press and hold the button
for about 3 seconds until the status LED flashes green.
Power button
The power button is used with the control button to reset the camera to factory default settings. See page 65.
Connectors
Network connector
RJ45 Ethernet connector.
SFP connector.
I/O connector
Use the I/O connector with external devices in combination with, for example, motion detection, event triggering, and alarm
notifications. In addition to the 0 V DC reference point and power (12 V DC output), the I/O connector provides the interface to:
Digital input - For connecting devices that can toggle between an open and closed circuit, for example PIR sensors, door/window
contacts, and glass break detectors.
Digital output - For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX®
Application Programming Interface, through an event or from the device's web interface.
62
Advertisement
Table of Contents
