Audio - Axis P5676-LE User Manual

AXIS P5676-LE PTZ Camera
The web interface
-
-
-
-
Settings
• Limit number of users in queue: Set the maximum number of users allowed in a queue. The default number is 20,
and allowed values are 1–100.
• Control queue poll time: Set how often to poll the camera to update the place of the users or user groups in the
queue. The default value is 20 seconds, and allowed values are from 5 seconds to 60 minutes.

Audio

Overview
Locate device: Plays a sound that helps you identify the speaker. For some products, the device will flash a LED.
Calibrate : Calibrate the speaker.
Launch AXIS Audio Manager Edge: Launch the application.
Device settings
Input: Turn on or off audio input. Shows the type of input.
Allow stream extraction
Input type : Select the type of input, for instance, if it's internal microphone or line.
Power type : Select power type for your input.
Apply changes
Separate gain controls
Automatic gain control
Gain: Use the slider to change the gain. Click the microphone icon to mute or unmute.
Output: Shows the type of output.
Gain: Use the slider to change the gain. Click the speaker icon to mute or unmute.
Stream
Encoding: Select the encoding to use for the input source streaming. You can only choose encoding if audio input is turned on. If
audio input is turned off, click Enable audio input to turn it on.
Timeout type
Timespan: Time out after reaching the set duration.
Activity: Time out after reaching the set duration since the last activity.
Infinity: Never to time out until a user with higher priority takes control.
: Turn on to allow stream extraction.
: Apply your selection.
: Turn on to adjust the gain separately for the different input types.
: Turn on to dynamically adapt the gain to changes in the sound.
35