Axis P5676-LE User Manual page 67

AXIS P5676-LE PTZ Camera
Specifications
10–pin push-pull system connector
Function
AC/DC Power
input
Configurable
(Input or Output)
DC Output
GND
Audio Line Out
Pin Notes
9, 10
The input is polarity independent. Use a Safety Extra Low
Voltage (SELV) compliant limited power source (LPS) with
either a rated output power limited to ≤100 W or a rated
output current limited to ≤5 A.
Digital input – Connect to pin 8 to activate, or leave
3 – I/O 1
floating (unconnected) to deactivate.
5 – I/O 2
6 – I/O 3
Digital output – Connected to pin 8 when activated,
7 – I/O 4
floating (unconnected) when deactivated. If used with an
inductive load, e.g. a relay, a diode must be connected
in parallel with the load, for protection against voltage
transients.
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
8
Ground for audio and I/O
4
Can be connected to a public address (PA) system or an
active speaker with a built-in amplifier
67
Specifications
24 V AC/DC
0 to max 30 V DC
0 to max 30 V DC, open drain,
100 mA
12 V DC
Max load = 50 mA