Axis P5676-LE User Manual page 34

AXIS P5676-LE PTZ Camera
The web interface
OSDI zones
On-screen direction indicator (OSDI) gives information of the direction the camera is pointing at in the text overlay. The camera
uses the coordinates of the center of the image when you set the lower left and upper right zone area.
Create OSDI zone: Click to create an OSDI zone.
• Name: Enter a name for the zone.
• Active: Turn on to display the zone in the live view.
• Zone limits
-
-
-
The context menu contains:
• Create multiple zones: Click to create multiple zones. Enter a name for the zone, and specify the coordinates
for lower left and upper right of the zone.
-
• Delete all zones: Click to delete all zones.
Orientation aid
Orientation aid: Turn on to activate overlays of user-defined points of interest at the correct bearing and a 2D-compass
synchronized to the cameras movements, including a field of view.
Direction
• Set north: Position the camera at north, and click Set north.
Preset positions: Select the preset positions used for orientation aid.
• To select an individual preset position, click the preset position.
• To select all preset positions, click
Gatekeeper
A gatekeeper monitors an area such as an entrance gate. When motion is detected in the monitored area, the gatekeeper steers
the camera to a selected preset position. Using a zoomed-in preset position can make it possible to, for example, read a license
plate or identify a person. When motion is no longer detected, the camera returns to its home position after a defined time.
Control queue
User control queue
• PTZ control queue: Turn on to place PTZ control requests in a queue. This displays the users status and position in the
queue. To use the PTZ controls in AXIS Camera Station, turn off this setting.
-
-
• The user groups are listed in a prioritized order with the highest priority on top. To change the priority of a user
group, click
For each user group:
-
: Navigate to your desired position, and click the icon to set the lower left point of the zone. Click
again to unset the lower left point.
: Navigate to your desired position, and click the icon to set the upper right point of the zone. Click
again to unset the upper right point.
Go to: Click to go to the lower left point or the upper right point of the zone.
Add zone coordinates: Click to specify the parameters for another zone.
Enter queue: Click to add your request for PTZ control to the queue.
Release control: Click to release the PTZ control.
and drag the user group up or down.
Timeout duration: Set the amount of time to wait before timeout. The default value is 1 minute, and
allowed values are from 1 second to 60 minutes.
.
34