Installation; Installation Methods - Mitsubishi Electric Trane TE-200A Installation Manual

5. Installation

To reduce the risk of injury or electric shock, switch off the main power before performing
electrical work.
To avoid malfunction, do not bundle power cables and signal cables together or place
them in the same metallic conduit.

5-1. Installation methods

The TE-200/TE-50 can be installed by any of the following installation methods.
Method 1 Wall-embedded installation
(Refer to section 5-5-1 and 5-5-2 for installation
procedures.)
Method 2 Wall-embedded installation with an electrical box
(Refer to section 5-5-1 and 5-5-3 for installation
procedures.)
Method 3 Installation on a metal control box
(Refer to section 5-5-4 for installation procedures.)
Method 4 Installation inside a metal control box
* Separately-sold mounting kit (PAC-YG86TK-J) is required.
(The kit includes DIN rail attachments and L-fittings). Refer
to the kit's Installation Manual for installation procedures.
Method 5 Installation on the wall
* Separately-sold Mounting Attachment (PAC-YG82TB-J) is
required. Refer to the attachment's Installation Manual for
installation procedures.
WT09302X01
TE-200/TE-50
TE-200/TE-50
TE-200/TE-50
Metal control box
TE-200/TE-50
Metal control box
TE-200/TE-50
12
Wall
Electrical box PAC-
YG84UTB-J (sold
separately)
Wall
Wall
DIN rail
Wall
Mounting Attachment
PAC-YG82TB-J (sold
separately)
Wall