Mitsubishi Electric Trane TE-200A Installation Manual page 15

5-5-1. Cutting an installation hole and mounting holes in the wall (Methods 1 and 2)
Cut an installation hole (169 × 252 mm (6-21/32 × 9-59/64 in)) and mounting holes in the wall as shown in the figure
below.
252 (9-59/64)
217 (8-35/64)
5-5-2. Wall-embedded installation (Method 1)
Roundhead screw (M4 × 10)
(supplied)
L-shaped driver
(supplied)
WT09302X01
Unit: mm (in)
ø6 (ø15/64)
Countersunk screw (M4 × 40)
(supplied)
* Use the supplied wood screws when installing on a wall that is strong enough to
be fixed with the wood screws.
Plate B
(supplied)
* Not used when installing on a wall that is strong enough to
be fixed with the wood screws.
Wall
Plate A
(supplied)
15