Installing The Gauge; Pedal Pressure And Pedal Stroke - JUKI DLM-5400NDD-7 Instruction Manual

35. Installing the gauge

WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.

36. Pedal pressure and pedal stroke

WARNING :
Be sure to turn the power OFF before the following work in order to prevent personal injury due to
unintentional starting of the sewing machine.
❶
(1) Adjusting the pressure required to
1) This pressure can be changed by changing the
❷
2) The pressure decreases when you hook the
3) The pressure increases when you hook the
(2) Adjusting the pressure required to
❸
1) This pressure can be adjusted using regulator
2) The pressure increases as you turn the regulator
3) The pressure decreases as you turn the screw
(3) Adjusting the pedal stroke
1) The pedal stroke increases when you insert
– 25 –
・ When installing the gauge, be sure to bring the
cloth trimmer to its lowest point and tighten two
setscrews little by little alternately while lightly
pressing the gauge against cloth trimmer.
depress the front part of the pedal
mounting position of pedaling pressure adjust
spring ❶.
spring on the left side.
spring on the right side.
depress the back part of the pedal
screw ❷.
screw in.
out.
connecting rod ❸ into the right hole.