Indicators And Operational Controls; Indicators And Operational Controls In The Control Panel - Leuze electronic DDLS 538 S2 Series Original Operating Instructions

Device description
3.3

Indicators and operational controls

3.3.1

Indicators and operational controls in the control panel

Operating mode selector switch and operating mode indicator
• Operating mode selector switch [MODE]
The operating mode selector switch is used to switch between the operating modes of the device (see
chapter 6 "Starting up the device").
• Operating mode LEDs AUT, MAN, ADJ, LAS, LLC
• MAS configuration LED
Operating mode LEDs and the configuration LED indicate the active operating mode.
1 AUT – Automatic
2 MAN – Manual
3 ADJ – Adjust
4 LAS – Alignment laser for mounting support
5 LLC – Link Loss Counter
6 MAS – DDLS 538 ... S2 ... installed on the master side
7 MODE – Operating mode selector switch
Fig. 3.3: Operating mode LEDs, configuration LED, and operating mode selector switch
Leuze electronic GmbH + Co. KG
6
DDLS 538 ... S2 ...
1 2 3 7
4 5
15