1. Manuals
  2. Brands
  3. CHAINTECH Manuals
  4. Motherboard
  5. 6VJD
  6. Manual

CHAINTECH 6VJD Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Declaration of Conformity
According to 47 CFR, Parts 2 and 15 of the FCC Rules
is a Class B digital device that complies with 47 CFR Parts 2 and 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
This declaration is given to the manufacturer:
CHAINTECH-EXCEL COMPUTER INC.
4427 Enterprise St. Fremont, CA 94538, U.S.A.
The following designated product:
EQUIPMENT: MAINBOARD
MODEL NO.: 6VJD
http://www.chaintech-excel.com
Chaintech President: Simon Ho
Signature:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6VJD and is the answer not in the manual?

Questions and answers

Related Manuals for CHAINTECH 6VJD

Summary of Contents for CHAINTECH 6VJD

  • Page 1 According to 47 CFR, Parts 2 and 15 of the FCC Rules The following designated product: EQUIPMENT: MAINBOARD MODEL NO.: 6VJD is a Class B digital device that complies with 47 CFR Parts 2 and 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
  • Page 2 Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 3: Table Of Contents

    Table of Contents Chapter 1 Introduction ................ 1 Product Specifications ............1 Package Contents ..............4 Mainboard Layout ..............5 Connector and Jumper Reference Chart ......6 Chapter 2 Hardware Setup ..............7 Introduction to Jumpers ............7 Installing a CPU in a Socket 370 .......... 8 CPU Jumper Configuration..........8 Connector and Jumper Settings.........10 Main Memory Configuration ..........

  • Page 4: Chapter 1 Introduction

    Introduction Chapter 1 Introduction 1-1 Product Specifications ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! " ! ! ! ! ! ! ! ! ! !
  • Page 5 Chapter 1 ! ! ! ! ! ! ! ! ! ! # # # # # - Built-in FM-emulation music synthesizer ! ! ! ! ! ! ! ! ! ! USB Controller ! ! ! ! ! Advanced Management Features ! ! ! ! !
  • Page 6 Introduction Max. Regulation Min. Current Output Voltage Requirement Requirement (Amps) +12V +/- 5% +/- 5% +3.3V +/- 5% +/- 10% -12V +/- 10% +5VSB +/- 5% 0.75 Table...

  • Page 7: Package Contents

    Chapter 1 1-2 Package Contents Figure 1-1 UDMA-66/100 IDE cable Figure Standard Floppy cable...

  • Page 8: Mainboard Layout

    Introduction 1-3 Mainboard Layout...

  • Page 9: Connector And Jumper Reference Chart

    Chapter 1 1-4 Connector and Jumper Reference Chart Jumper & Function Page Connector No. Clear CMOS Data JP5/JP6 CPU Bus Frequency 8/13 Power-On By Keyboard Power-On By USB JP12 CPU Clock Ratio Jumper CD-ROM Audio-in Auxiliary CD-ROM Audio-in Audio Mono -in/out Over Ride Power Button Connector Power Indicator LED Connector System Reset Switch Connector...

  • Page 10: Chapter 2 Hardware Setup

    Hardware Setup Chapter 2 Hardware Setup Be sure to disconnect the power cable from the power source before performing any work on your mainboard, i. e. installing a CPU, memory module, changing a jumper setting, etc. Not doing so may result in electrical shock! 2-1 Introduction to Jumpers Putting jumper caps on anything that is not a jumper may result in damaging your mainboard.

  • Page 11: Installing A Cpu In A Socket 370

    Chapter 2 2-2 Installing a CPU in a Socket 370 Installing a heat sink with cooling fan is necessary for proper heat dissipation from your CPU. Failing to install these items may result in overheating and possible burnout of your CPU. 2-3 CPU Jumper Configuration Frequency Configuration...
  • Page 12 Hardware Setup Overclocking...

  • Page 13: Connector And Jumper Settings

    Chapter 2 2-4 Connector and Jumper Settings The power supply connector is the last connection to be made while installing a mainboard. Before connecting the power supply, please make sure it is not connected to the power source. ATX Power Supply Connector (PW1) Software Power-Off Control Power-On By Modem...

  • Page 14: Over-Ride Power Button

    Hardware Setup Front Panel Connector Set (CN5) A through F A. Over-ride Power Button Connector B. Power Indicator LED Connector Over-ride Power Button Operation Definition +5V DC Not Connected Ground Blinking LED in Suspend Mode...

  • Page 15: Poly-Fuse Over Current Protection

    Chapter 2 C. Green Switch Connector D. System Reset Switch Connector Definition Systeml E. Speaker Connector Definition +5V DC Speaker Singal F. IDE Activity LED Connector Poly-fuse Over Current Protection...

  • Page 16: Jp8 Power-On By Keyboard

    Hardware Setup Clear CMOS Data (JP1) CPU Bus Frequency (JP5/JP6) Auto 100MHz Open 133MHz Open Open Power-On By Keyboard (JP8) This board is able to be turned on by the PS/2 keyboard (hot key/Password). To use this function, select a device of your choice at the Power on Function option in BIOS's Integrated Peripherals screen.

  • Page 17: Jp9 Power-On By Usb

    Chapter 2 Power-On By USB (JP9) Disble (default) Enable This board is able to be turned on by a USB keyboard (hot key/Password) or a USB mouse click. To use this function, select a device of your choice at the Power on Function option in BIOS's Integrated Peripherals screen.

  • Page 18: Cn3 Auxiliary Cd-Rom Audio-In

    Hardware Setup Auxiliary CD-ROM Audio-in (CN3) Audio Mono -in/out (CN4) Use the mono audio cable enclosed with your audio device to your mainboard. This will enable mono audio in/out function. Mono-in Mono-out PS/2 Mouse and Keyboard Ports (PT1) Definition Data No Connect Ground +5V (fused)

  • Page 19: Wake Up On Lan

    Chapter 2 WOL (Wake-on-LAN) Connector (CN6) 750mA USB 1/2 Ports and USB 3/4 Connector (USB1/CN14) CN14...
  • Page 20 Hardware Setup IR & CIR Connector (IR2) CPU/System Cooling Fan Connectors (FAN1/FAN2) FAN1 FAN2...

  • Page 21: Main Memory Configuration

    Chapter 2 2-5 Main Memory Configuration DDR SDRAM Specifications FSB Frequency Internal System Bus Freq. 66 MHz 200 MHz 100 MHz 200/266 MHz 133 MHz 200/266 MHz...

  • Page 22: Chapter 3 Award Bios Setup Program

    Award BIOS Setup Program Chapter 3 3 3 3 3 3 Award BIOS Setup Program Award's BIOS ROM has a built-in setup program that allows users to modify the basic system configuration. This information is stored in CMOS RAM so that it can retain the setup information, even when the power is turned off.

  • Page 23: Standard Cmos Setup

    Chapter 3 3-1 Standard CMOS Features The Standard CMOS Features allows users to configure system components such as hard disk drive, floppy disk drive and video display as well as date, time and boot up error signaling. This configuration menu should be changed when installing a mainboard for the first time, changing hardware in your system such as the HDD, FDD, video display, or when the CMOS data has been lost or contaminated.
  • Page 24 Award BIOS Setup Program Type (Auto/User/None): Use the fields under the Type column to determine the method you will use to configure the IDE devices. If you choose Auto, BIOS will automatically detect and make optimal settings for most IDE hard drives. The mainboard manufacturer recommends that you choose Auto for all drives.
  • Page 25 Chapter 3 * Large - for IDE drives that do not support LBA and have more than 1024 cylinders. Try this setting if your hard disk does not operate properly with the LBA setting. Large mode is not supported by all operating systems, i.e., only certain versions of DOS support large mode.

  • Page 26: Advanced Bios Features Setup

    Award BIOS Setup Program 3-2 Advanced BIOS Features By choosing the Advanced BIOS Features option from the CMOS Setup Utility menu (Figure 3-1), the screen below is displayed. This sample screen contains the manufacturer's default values for the mainboard. CMOS Setup Utility- Copyright (C) 1984-2001 Award Software Advanced BIOS Features  Item Help Anti-Virus Protection...
  • Page 27 Chapter 3 B. Cache Control CPU Internal Cache/External Cache Cache memory is much faster than conventional DRAM system memory. These fields allow you to enable or disable the CPUs Level 1 built-in cache and Level 2 external cache. Both settings are left enabled to significantly increase the performance of your computer.
  • Page 28 Award BIOS Setup Program Typematic Delay (Msec) The typematic delay sets how long after you press a key that a character begins repeating. E. Security Option The Supervisor and/or User Password functions shown in Figure 3-1 must be set to take advantage of this function. See Section 3-11 for password setting information.

  • Page 29: Advanced Chipset Setup

    Chapter 3 3-3 Advanced Chipset Features By choosing the Advanced Chipset Features option from the CMOS Setup Utility menu (Figure 3-1), the screen below is displayed. This sample screen contains the manufacturer's default values for the mainboard. CMOS Setup Utility- Copyright (C) 1984-2001 Award Software Advanced Chipset Features Item Help DRAM Clock/Drive Control...
  • Page 30 Award BIOS Setup Program B. AGP & P2P Bridge Control AGP Aperture Size This function determines the amount of system memory that is given to the AGP card. Options range from 4MB to 128MB. This is a dynamic memory allotment in that the AGP card will only use the amount of memory that it needs.
  • Page 31 Chapter 3 F. Video RAM Cacheable Enabling this function will allows caching of the video RAM, resulting in better system performance. However, if any programs write to this memory area, a system error may occur. G. Flash BIOS Protection The mainboard manufacturer developed BIOS protection technology that protects the System BIOS from accidental corruption by unauthorized users or computer viruses.

  • Page 32: Integrated Peripherals

    Award BIOS Setup Program 3-4 Integrated Peripherals This section provides information on setting peripheral devices. By choosing the Integrated Peripherals option from the CMOS Setup Utility menu (Figure 3-1), the screen below is displayed. This sample screen contains the manufacturer's default values for the mainboard.
  • Page 33 Chapter 3 B. VIA OnChip PCI Device VIA-3058 AC97 Audio This feature allows you to enable the on-board audio function. VIA-3068 MC97 Modem This feature allows you to enable the on-board modem function. VIA-3043 OnChip LAN This feature allows you to enable the on-board LAN function C.

  • Page 34: Power Management Setup

    Award BIOS Setup Program 3-5 Power Management Setup This section provides information on the Green PC power management functions. By choosing the Power Management Setup option from the CMOS Setup Utility menu (Figure 3-1), the screen below is displayed. This sample screen contains the manufacturer's default values for the mainboard CMOS Setup Utility- Copyright (C) 1984-2001 Award Software Power Management Setup...
  • Page 35 Chapter 3 C. Video Off Option This setting allow you to selects the power-saving modes during which the monitor goes blank. D. Video Off Method This function serves as both a screen saver and power saver for monitors. See the next function, Video Off After, for setting the video timer. Blank - BIOS will only blank the monitor's screen.

  • Page 36: Power On By Alarm

    Award BIOS Setup Program G. IRQ/Event Activity Detect PS2KB Wakeup When enabled, the system is able to be turned on by a PS2 keyboard (hot key/ Password). Power On PCI Card When enabled, a PCI interface that receives a signal will wake up the system from soft off and green mode.

  • Page 37: Pnp/Pci Configuration

    Chapter 3 3-6 PNP/PCI Configuration This section provides IRQ and DMA setting information. By choosing the PNP/ PCI Configuration option from the CMOS Setup Utility menu (Figure 3-1), the screen below is displayed. This sample screen contains the manufacturer's default values for the mainboard.

  • Page 38: Pc Health Status

    Award BIOS Setup Program 3-7 PC Health Status By choosing the PC Health Status option from the CMOS Setup Utility menu (Figure 3-1), the screen below is displayed. This sample screen contains the manufacturer's default values for the mainboard. CMOS Setup Utility- Copyright (C) 1984-2001 Award Software PC Health Status  Item Help...

  • Page 39: Frequency/Voltage Control

    Chapter 3 3-8 Frequency/Voltage Control By choosing the Frequency/Voltage Control Setup option from the CMOS Setup Utility menu (Figure 3-1), the screen below is displayed. This sample screen contains the manufacturer's default values for the mainboard. CMOS Setup Utility- Copyright (C) 1984-2001 Award Software Frequency/Voltage Control  CPU Vcore Select...

  • Page 40: Load Fail-Safe Defaults

    Award BIOS Setup Program 3-9 Load Fail-Safe Defaults Load Fail-Safe Defaults loads the default BIOS values directly from the CMOS Setup Utility menu (Figure3-1). If the stored record created by the setup program becomes corrupted and therefore unusable, these defaults will be loaded automatically when you turn on the computer.

  • Page 41: Load Optimized Defaults

    Chapter 3 3-10 Load Optimized Defaults Load Optimized Defaults loads the default system values directly from the CMOS Setup Utility menu (Figure3-1). If the stored record created by the setup program becomes corrupted and therefore unusable, these defaults will be loaded automatically when you turn on the computer.

  • Page 42: Supervisor Password & User Password Setting

    Award BIOS Setup Program 3-11 Supervisor Password & User Password Setting There are four different variables that control password settings. The first two are located under the Security Option function in BIOS Features Setup Menu (Figure 3-1). When the Security Option function is set to Setup, a password is required to enter BIOS and change BIOS settings.

  • Page 43: Save And Exit Setup

    Chapter 3 B. Set Both Supervisor Password and User Password Figure 3-13 Set Both Supervisor and User Password 3-12 Save and Exit Setup If you select this and type Y (for yes) followed by the [Enter] key, the values entered in the setup utilities will be recorded in the CMOS memory of the BIOS chip.

  • Page 44: Chapter 4 Brief Software Driver Guide

    Brief Software Driver Guide Chapter 4 Chapter 4 Chapter 4 Chapter 4 Chapter 4 Brief Software Driver Guide The Mainboard Software Guide is found on the CD-ROM that is enclosed with your mainboard and is a PDF file which must be viewed with Adobe's freeware called Acrobat Reader.
  • Page 45 Chapter 4 ! Memo...

  • Page 46: Appendix I On Board I/O Addresses & Irq Maps

    Appendix I On Board I/O Addresses & IRQ Maps System Resource I/O Address 1. Timer IRQ0 040, 043 2. Keyboard IRQ1 060, 064 3. Programmable INT IRQ2 0020, 0021, 00A0, 00A1 4. COM2(B) IRQ3 2F8, 2FF 5. COM1(A) IRQ4 3F8, 3FF 6.
  • Page 47 User's Manual " Memo...

  • Page 48: Appendix Ii Embedded Flash Utility

    Appendix II Embedded Flash Utility This mainboard is equipped with an Erasable Flash ROM and an Embedded Flash Utility which allows the user to update the BIOS to a newer version. Embedded Flash Utility eases BIOS upgrade and eliminate the compatibility issue between different Flash ROM type and version of Flash utility.
  • Page 49 User's Manual Memo...

Table of Contents