According to 47 CFR, Parts 2 and 15 of the FCC Rules The following designated product: EQUIPMENT : MAINBOARD MODEL NO. : 6VIA5T is a Class B digital device that complies with 47 CFR Parts 2 and 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Chapter 1 1-4 Connector and Jumper Reference Chart Jumper & Function Page Connector No. ATX Power Supply Connector Over Ride Power Button Connector Power Indicator LED Connector Green Switch/GreenLED Connector CN1A System Reset Switch Connector Speaker Connector IDE Activity LED Connector Clear CMOS Data JP2A/JP2B External Clock Frequency...
Page 8
Hardware Setup +D=FJAH 0=H@M=HA5AJKF 2-1 Installing a CPU in a Socket 370 Installing a heat sink with cooling fan is necessary for proper heat dissipation from your CPU. Failing to install these items may result in overheating and possible burn-out of your CPU. The use of a Heatsink and Fan designed for the FC-PGA on a FC-PGA2 can cause damage to the socket or motherboard and will void any warranty.
Chapter 2 2-3 Connector and Jumper Settings The power supply connector is the last connection to be made while installing a mainboard. Before connecting the power supply, please make sure it is not connected to the power source. Poly-fuse Over Current Protection...
Page 10
Hardware Setup A. Over-ride Power Button Connector Over-ride Power B. Power Indicator LED Connector C. Green Switch/Green LED Connector D. System Reset Switch Connector E. Speaker Connector F. IDE Activity LED Connector...
Page 11
Chapter 2 Definition Normal (default) Clear CMOS Data JP2A JP2B Auto 100MHz Open 133MHz Open Open 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 4/10.5 11 4.5/11.5 5/12 RATIO A OFF ON ON OFF OFF ON OFFOFF ON ON ON OFF OFF ON ON ON ON OFF ON ON ON OFF OFF OFF C OFF ON OFF ON OFF ON ON OFF OFF OFF ON ON OFF OFF OFF OFF OFF ON ON ON OFF ON OFF...
Page 12
Hardware Setup This connector is used for Add on Card e.g. modem with Mono in/out connector. the power indicator LED, both shows the system's power status. The only difference is that this one is blue while the other is red LED.
Chapter 2 Definition Data No Connect Ground +5V (fused) Clock No Connect 2-4 Main Memory Configuration 32~512MBytes DRAM Specifications SDRAM Type SDRAM Type Max Memory FSB+33 10ns or faster 10ns or faster FSB+33 7.5ns or faster FSB-33 10ns or faster 7.5ns or faster...
Page 14
Award BIOS Setup Program +D=FJAH ! Award BIOS Setup Program CMOS Setup Utility- Copyright (C) 1984-2001 Award Software...
Award BIOS Setup Program 3-7 PC Health Status CMOS Setup Utility- Copyright (C) 1984-2001 Award Software PC Health Status Current CPU Temp. C/87 Current System Temp. C/71 4500 RPM Current CPU FAN Speed Current SYS FAN Speed 4500 RPM Vcore 1.75V 2.5V 2.48V...
User's Manual Appendix Embedded Flash Utility This mainboard is equipped with an Erasable Flash ROM and an Embedded Flash Utility which allows the user to update the BIOS to a newer version. Embedded Flash Utility eases BIOS upgrade and eliminate the compatibility issue between different Flash ROM type and version of Flash utility.
Need help?
Do you have a question about the 6VIA5T and is the answer not in the manual?
Questions and answers