Water Draining Connection - Elba EWF-N1287D(GR) Owner's Manual

3. Connect adaptor to the water tap by tightening the screws firmly. Then, turn part (b)
anti-clockwise and put part(a) and part(b) together.
4. Connect the water supply hose to the adaptor. Pull down the part (c) of the water supply
hose. When the part (c) is released, the hose is automatically connected to the adaptor
making a 'click' sound.
NOTICE:
• After completing connection, if water leakage from the hose, then
repeat the same step.
• Use the most suitable type of faucet for water supply.
• If the end of the faucet is square or too big, please loosen the four
screws. Unscrew and take out the bushing in the adaptor before
inserting the end of the faucet into the adaptor.

3.5 WATER DRAINING CONNECTION

• Before operating your washer, install drain hose properly. The other end of the drain
should set as below.
• Never attempt to extend or modify the water drain hose.
• Do not put water drain hose from your appliance into a container, bucket or bathtub.
• Make sure that the water drain hose is not bent, buckled, crashed or extended.
6