Table of Contents
Advertisement
3. INSTALLATION
3.1 ENVIRONMENT
Leave some space
Maintain at least 10cm between the washer and the wall
Place the washer on a sturdy flat surface
If the washer is placed on an uneven surface, noise or vibration will occurs. (Max. tilt angle on
the supporting surface: 2°
Adjust the legs for even placement.
Never install the washer near water.
Do not place the washer in steamy rooms or where the washer is directly exposed to rain.
Moisture may destroy the electrical insulation causing an electrical shock hazard.
Avoid direct sunlight or heater
As plastic and electrical components are affected by direct heat, never place the washer near
furnaces, boilers, etc.
Do not place the washer under direct sunlight.
ASSEMBLING THE BOTTOM PLATE
1. Place the washing machine on the soft laying cloth, the front side of the machine is
towards the upper.
2. Insert the bottom plate into the slots on the base under, and then tighten it with screw.
2
Advertisement
Table of Contents
