Before The Installation - Elba EWF-N1287D(GR) Owner's Manual

3.2 BEFORE THE INSTALLATION

• Please check the products and make sure there is no damage on the appliance.
• The appliance door is level, and you can open and close the appliance door flexibly.
• Specification on the marking plate is in compliance with the regulations.
• If the appliance appears in an abnormal way, do not install and unplug the power supply
before contacting the authorized service center.
• Do not attempt to repair or service the appliance by yourself. Repair or maintenance
should only be carried out by a qualified technician or the authorized service center.
• This appliance must be installed only by qualified technician or the authorized service
center. Manufacturer declines all responsibility for improper installation, which may harm
persons and cause damage to the property.
• The AC power supply should be supplied with 220-240V, 50Hz with minimum 13A
distribution circuit fuse or circuit breaker.
NEVER CONNECT THE GROUND WIRE TO SUCH A THING
3.3 SUITABLE WATER FAUCET TYPES
Water faucet type, as shown in the below figure:
Type A: This type is suitable. It is a special faucet for washer using.
Type B: This type is suitable. It is required that the front end of the faucet shall be longer than
10mm. The exit end surface of the faucet must be flat and smooth. Otherwise it may leak water.
Please file the end surface to avoid leakage.
Type C: This type faucet is not suitable, there may be leakage in the place shown in the figure.
If the water faucet is not suitable, it is needed to replace a suitable water faucet before
connecting the water inlet hose.
4