Delay End - Elba EWF-N1287D(GR) Owner's Manual

Method 2:
Firstly, press the
laundry automatically. The water level will be set automatically and start the washing program
immediately.
Method 3:
Firstly, press the
the laundry automatically. The water level will be set automatically and start the washing
program immediately.
6.4 SPIN ONLY
There are three methods to select "Spin" program.
Method 1:
When button is not pressed, press this button and hold for 3 seconds, the washer will
operate Spin program immediately.
Method 2:
Firstly, press button, then press this button and hold for 3 seconds, the washer will operate
Spin program immediately.
Method 3:
Firstly, press the
operate Spin program immediately.

6.5 DELAY END

Press the "Water Level" button and hold for 3 seconds to activate the delay end function.
• The delay end timer will appear on the electronic display.
• Press the "Water Level" button until the desired delayed time appears on the display
(from 0 to 24 hours).
• If you have skipped the delay time you wanted to set, keep pressing the Delay Start
button until the desired delay time is displayed again.
• Select the program and then press
washing cycle will start by the time you reserved. For example, you have preset the delay
end function for 2 hours and select the cotton program (49 minutes washing duration),
the appliance will start on 1 hour 11 minutes later. The total end time for whole washing
cycle will complete on 2 hours (which is preset delay end desired time).
button. Press this button and hold for 3 seconds, the washer will sense the
button. Press this button and then press
button, then press this button, and then press
button to start. After that close the lid. The
12
button, the washer will sense
button, the washer will