Program Selection - Elba EWF-N1287D(GR) Owner's Manual

6.1 PROGRAM SELECTION

Once the washer is turned ON, press this program button the select desired program. With
every press of this button, the washing program changes. Washing program will follow this
sequence: Cotton > Quick Wash > Extra Clean > Baby Care > Heavy Duty > Tub Clean.
Press button to start. Water level will be selected automatically. Washing cycle, rinsing, and
spinning will follow according to the program that has been selected. If you want to pause, press
the button again. It is unable to change the program when paused. Close the lid and washer
will start to operate automatically.
6.2 WATER LEVEL SELECTION
For each washing program, the water level can be changed manually.
1. Press button and select the washing program.
2. All the program will automatically adjust the water level by sensing the laundry load. If
you wish to have different water level, you can click "Water Level" button to your desired
level.
3. The correspond water level will show in display screen.
4. Press button to start and then close the lid.
5. The washing program will operate based on the water level you have selected.
6.3 I-SMART WASH
There are three methods to select i-Smart Wash program.
Method 1:
When button is not pressed, press this button and hold for 3 seconds, the washer will sense
the laundry automatically. The water level will be set automatically and start the washing
program immediately.
11