Spectra Logic Spectra 10000 Install Manual page 10

7) Ensure that Barcode Enabled is On.
Barcode Enable On (4000)
8) If it is not on, push + side of the button to enable the Barcode Scanner.
Note - If it is a 9000/10000 library, the "Barcode Chksum" should be enabled (On).
9) Once Barcode Enabled is On, push Save Parms to save the settings.
9) Return to the Main Screen.
Spectra 4000 - 10000 Library Family Barcode Scanner Replacement Guide 10