Assembly - Pro-Form PFTL59906.3 User Manual

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it has been
preassembled. To avoid damaging plastic parts, do not use power tools for assembly. Extra hardware
may be included.
Screw (3)–2
Extension Leg Nut
(67)–2
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side as shown. Partially
fold the Frame (58) so the treadmill is more sta-
ble. Do not fully fold the treadmill until it is
completely assembled.
Insert an Extension Leg (89) into the base of the
Uprights (84). Hold an Extension Leg Nut (67) in
the bottom of the Extension Leg, and thread a
2 1/4" Extension Leg Bolt (92) into the top of the
Extension Leg. Next, thread a 2 1/2" Extension
Leg Bolt (65) into the bottom of the Extension
Leg. Firmly tighten the Extension Leg Bolts.
Slide a Front Endcap (44) onto the base of the
Uprights (84). Partially tighten a Front Endcap
Screw (14) into the Front Endcap and the base.
and your own Phillips screwdriver
Front Endcap
Screw (14)–2
2 1/4" Extension Leg Bolt (92)–2
1" Tek Screw (83)–2
2 1/2" Extension Leg Bolt (65)–2
1
84
92
89
58
6
.
Handail Bolt (64)–4
14
44
67
65