Fisher & Paykel ACTIVESMART RS9120WRJ1 Installation Manual page 30

External box IMPORTANT!
The template should be placed on the back side of the
door panel.
Door panel double-sided
template (1)
Tools
Cross-head screwdriver
2
Mark drill locations of screw
holes for the left hanging
Powered driver
bracket and side brackets.
Drill 2mm (3/32") screw holes
to the marked locations.
1A
Align left side edge
of template with
left side edge of
top door panel.
28
@0
DOOR PANEL INSTALLATION — CUSTOM
Using the installation template
(for top door panel)
Left hinge door panel side
ANEL LEFT SIDE DOOR PANEL RIGHT SIDE
CKET HOLES HANGING BRACKET HOLES
DOOR PANEL BOTTOM EDGE
1B
Align bottom of template with
bottom edge of top door panel.
back side of
door panel
6
To mark the drill locations of middle screw holes, align the
screw holes of door hanging bracket with right and left
drilled screw holes. Drill screw holes to marked locations.
DOOR PANEL LEFT SIDE DOOR PANEL RIGHT SIDE
HANGING BRACKET HOLES HANGING BRACKET HOLES
DOOR PANEL
TEMPLATE
849548
DOOR PANEL BOTTOM EDGE
3
Move the same template to
right hand side of door panel.
front side of
door panel
Right hinge door panel side
DOOR PANEL LEFT SIDE DOOR PANEL RIGHT SIDE
HANGING BRACKET HOLES HANGING BRACKET HOLES
DOOR PANEL LEFT SIDE DOOR P
HANGING BRACKET HOLES HANGING BRA
5
Mark drill locations of screw
holes for the right hanging
bracket and side brackets.
Drill 2mm (3/32") screw holes
to the marked locations.
DOOR PANEL
TEMPLATE
849548
DOOR PANEL BOTTOM EDGE
DOOR PANEL BOTTOM EDGE
4B
Align bottom of template with
bottom edge of top door panel.
4A
Align right side
edge of template
with right side
edge of top door
panel.