Table of Contents
Advertisement
Internal box
Remove hanging brackets
1
Remove the M8 washers and M8 nuts from the M8
Door panel
B
studs at the top the door (A) using the hex key and
attachment kit
spanner. Keep the washers and nuts to reuse later.
2
Remove the hanging bracket from the top of each
door and set aside (B) for later installation.
Side bracket
(10)
Side strap
(10)
#8x16 mush washer screw
(24)
Door handle kit
M5x25 pan head socket
screw (8)
Tools
Hex key
FPA spanner
Cross-head screwdriver
Torx screwdriver
30
@0
DOOR PANEL INSTALLATION — CUSTOM
A
B
Attach the door and drawer handles (C)
3
Align the handle holes with the door
panel holes and secure the handle with
M5x25 pan head socket screws (4 for each
handle).
Attach the hanging brackets (D)
4
Align the bracket to the holes and
secure with M5x14 mush cross-head
SS screws (12).
Attach side brackets and straps (E)
5
Align the brackets and straps to the holes
on the side of the panel and secure with
M5x14 mush cross-head SS screws (12).
E
C
D
D
C
Advertisement
Table of Contents
