Remote Operation Signal Communication - Space-Ray FUSION Series Installation & Operation Instructions

13.4)

REMOTE OPERATION SIGNAL COMMUNICATION

This optional remote heater operation signal communication is available for both the single and two stage heater models.
Each heater must be connected to its individual signal LED.
The wire connection is made as indicated below in the respective wiring diagram.
Signal voltage: 24Vac
Maximum wire length: 300 ft
Minimum wire gauge: 20ga
House controller indicator LED: 0.05A power consumption
Wire connections (single stage controls) on push burner are as below:
Form 43343100
April 2022 A -35-