Table of Contents
Advertisement
C. LOW VOLTAGE (24V) 3 WAY MANUAL SWITCH CONNECTIONS – MULTIPLE HEATERS
13.3)
RECOMMENDED THERMOSTAT SENSOR LOCATION
The thermostat sensor should be located approximately 10ft from side of the heater as shown in Figure 1 and at
distances from burner box as shown in chart of Figure 2 below. Ideally this should also be located between the
feed and drink lines. Avoid locating the sensor in a direct draft such as in front of a fan or between the fan and a
door. The result can cause overrunning of the heater and excess fuel consumption.
Form 43343100
April 2022 A
-33-
Advertisement
Table of Contents
Troubleshooting
