RC4080 ACU
Chapter 5
Support
2.1.3 Graphical User Interface Software Overview
The Graphical User Interface to the RC4080 can be accessed by navigating to the IP address of the
controller using a web browser. The default IP address of the RC4080 is 192.168.1.1
2.1.3.1 Graphical User Interface Main Page
Automatic
The Automatic tab allows the user to LOCATE a satellite or Pack (STOW) the antenna. On the DVB
version, dropdown box will allow the user to select a satellite preset for the locate operation. On the
OpenAMIP version, this dropdown will not be present and the satellite information will come from the IP
connected modem.
Additionally, the user is able to navigate to the /config webpage and the /rcfp webpage (2.1.2) by clicking
the image of the wrench and screwdriver or the front panel respectively.
35