RC4080 ACU
2.1.2.2.2.3.3 TILT
When the user chooses to modify the tilt, a screen appears showing two options for updating the current
tilt.
< 1 > E N T E R M A N U A L P I T C H / R O L L
< 2 > M O V E A N T E N N A T O G E T P I T C H / R O L L
<1>ENTER MANUAL PITCH/ROLL
P I T C H :
P L A T F O R M P I T C H < + / - 6 0 . 0 D E G >
When option 1 is selected, the user is prompted to manually enter the pitch and roll of the platform. Note
that the pitch and roll is measured at the azimuth centerline and should be entered based on that position.
P I T C H :
R O L L :
<2>MOVE ANTENNA TO GET PITCH/ROLL
When option 2 is selected, the RC4080 will pull in the tilt from source specified by the tilt configuration
item. Once complete the controller will automatically move back to the main LOCATION screen.
A Z I M :
E L E V :
M O V I N G T O D E T E R M I N E T I L T
Note that if movement is required to acquire the pitch and roll information, the following screen will be
displayed so the user can confirm the movement.
< E N T E R > C O N F I R M M O V E
Chapter 5
0 . 5
0 . 3
4 0 . 4 (
0 . 0 )
1 6 . 0 (
1 6 . 0 )
*
A N T E N N A M O V E M E N T R E Q U I R E D
*
T O D E T E R M I N E P I T C H / R O L L
< M O D E > E X I T
R O L L :
< S C R > E X I T
P O S I T I O N
< S T O P > H A L T
P O S I T I O N
< M O D E > E X I T
34
Support
T I L T
T I L T
T I L T
*
*