Cooktop Custom Settings - Monogram ZHP304 Manual

USING THE RANGE

COOKTOP CUSTOM SETTINGS

1. Press and hold All
Off and Timer pads
together for 3 seconds.
2. To navigate through the
Settings Menu, use the +
and - buttons on the Display.
To select a menu, press the
Timer pad.
Feature Menu
1 Factory Settings
2 Cooktop Lockout
3 Cooktop LED
Brightness
4 Button Volume
5 Cooktop Kitchen
Timer Volume
6 Cooktop Kitchen
Timer End Tone
7 Temperature Units
18
3. To activate a Setting, press the Timer pad.
4. To exit Settings Menu, press the All Off pad.
Timer Pad
Default Options Description of Options
• "No" : exits out of the Factory reset menu and takes
the user back to the main menu.
• "YES" : Clears customized settings and restores
defaults
• "USEr" : Defined as stated in the Cooktop Lockout
section
• "Auto" : In addition to the standard lock behavior (see
Cooktop Lockout section) the cooktop controls will be
locked if no element or timer has been active as well
as no keys have been pressed for 10 minutes.
• "Hi" = Cooktop lights at highest brightness level.
• "rEG" = Cooktop lights at medium brightness level.
• "Lo" = Cooktop lights at lowest brightness level.
• "Hi" : All touch key sounds activated to highest sound
level.
• "Lo" : All touch key sounds activated to lowest sound
level.
• "OFF" : All touch key sounds off.
• The sound settings shall not affect alarm tone output
levels.
• "Hi" : Alarm sound level at the highest volume setting.
• "Lo" : Alarm sound level at the lowest volume setting.
• "Cont" : The timer end tone plays continuously until
the user acknowledges the timer and tone.
• "bEEP" : The timer end tone is played only once.
• "F" : Temperature units in degrees Fahrenheit.
• "C" : Temperature units in degrees Celsius.
49-2001169 Rev. 0