Table of Contents
Advertisement
10.1 Sequences and Cycles Quick Reference
The icons shown below are used when editing a Sequence or Cycle. They help to identify the start, middle and end of a
Sequence.
The first Link in a Sequence.
A Link in the middle of a Sequence, or any Link in a Cycle.
The last Link in a Sequence.
10.2 Adding a Sequence or Cycle
A Scene can only be used once in a Sequence or Cycle, and must be selected from within a single Group (or Broadcast).
This means that a Sequence or Cycle may include up to 16 Scenes.
1. From
Main Menu select the following:
2.
to display the Sequences and Cycles menu.
3.
to display the Pop up menu.
4.
to enter Add mode.
5.
to add a new Sequence, or
6.
to select a Group. You can only do this when a Sequence or Cycle is first added.
7.
to select a scene within the selected Group.
8. You may edit the other properties of the Sequence or Cycle now or later. To learn about the properties and how to edit
them, see section 10.3.
9.
to toggle between adding another Link after this one, or completing the Sequence or Cycle.
10.
to save the link. If adding is complete then you will be returned to Sequence or Cycle. If you are adding more links
then the new link will be shown.
34
Helvar 924 LCD TouchPanel: Installation and User Guide
to add a new Cycle. This creates the first Link of the Sequence or Cycle.
www.helvar.com
Advertisement
Table of Contents
