Table of Contents
Advertisement
5.2 Renaming a Group
It can be useful to rename each Group, for example, to indicate the room or area it represents.
1. From
Main Menu select the following:
2.
Edit Scenes.
3.
to display the Pop up menu.
4.
and then
from the list choose the Group you want to rename.
5.
and then type in a new name for the Group.
6.
to save the changes.
5.3 Load Quantity Limits
TouchPanel can work with Imagine, and/or DALI/ Digidim loads. When in Master Panel mode, TouchPanel can work with
up to 64 Imagine channels and/or 63 DALI/Digidim channels. DALI and Digidim loads are addressed automatically, so you
do not need to set these addresses.
When using Imagine loads the addresses must be in the range 1 to 64. To learn how to set the address of an Imagine load,
see the documentation accompanying it.
5.4 Identifying a Load
1. From
Main Menu select the following:
2.
to display the Loads menu.
3.
to view the Pop up Menu.
4.
to enter Identify mode
5. Select the Load to identify. The Load will toggle between Min and Max levels until you select a different Load, or you exit
Identify mode.
6. Repeat step 5 to identify more Loads, or
11 Helvar | Data is subject to change without notice.
to exit Identify mode
www.helvar.com
11
Advertisement
Table of Contents
