Table of Contents
Advertisement
8.3 Editing Screen properties
Screen properties allow you to change the Layout and Theme or background of a Screen, and change the Group to which
its buttons belong.
1. From
Main Menu select the following:
2.
to display the Screens menu.
3.
to display the Pop up menu.
4.
to enter Properties mode.
5. Navigate to the required Screen in the list, and then press the Screen to edit it. Choose one of the following settings:
*
and choose the Group (or
Screen will belong.
*
and choose a Theme for the Screen.
6.
to display the Advanced Settings screen. Choose one of the following settings:
*
to change the Screen Title. It is useful to give each Screen a friendly or descriptive title.
*
display or hide the Screen Title.
*
to enable password protection for this Screen, or
has been enabled, this Screen can only be displayed if the correct password is entered. This is a useful way to
limit access to TouchPanel in public access or sensitive locations.
*
to choose a background picture or solid colour.
background colour, press
background image of the Theme.
*
to enable or disable Timeout. Each Screen can have a Return Screen Timeout that limits the length of time it will
remain on the screen before switching automatically to a different Screen. This can be used to ensure that each
new user arriving at TouchPanel sees a familiar screen.
*
to set a Return Screen Timeout time.
*
to choose a Return Screen: If you have enabled Timeout, then you must choose a Screen to switch to after the
Timeout period. Normally this is Screen 1.
7.
to save the changes.
25 Helvar | Data is subject to change without notice.
to choose the Scene Block Address in Designer Mode) to which the buttons of this
to disable it. When a password has been set and protection
or
while in the Set Theme screen, and then choose a colour. This will override the
to change the change the picture. To choose a
www.helvar.com
25
Advertisement
Table of Contents
