Table of Contents
Advertisement
6.1 Setting Up Scenes
Before setting up Scenes, you should assign the Loads to Groups. To learn more about Groups, see section 5.
1. From
Main Menu select the following:
2.
to display the Edit Scenes menu.
3. Select the Group containing the loads you want to edit.
4. Select the scene to edit it.
5. Set the level for each load in the Scene by pressing in the loads bar, using
to toggle it between 100 % and Off.
6. Select
or
to set a load to Enabled or Ignore.
7.
to save the changes.
16
Helvar 924 LCD TouchPanel: Installation and User Guide
or
,or pressing the level value box
www.helvar.com
Advertisement
Table of Contents
