Table of Contents
Advertisement
3.2 Modes of Operation
Master Panel mode:
In Master Panel (MP) mode, TouchPanel can be independently configured and control all aspects of the
lighting system. Only one TouchPanel is allowed in MP mode. DALI/Digidim and Imagine (S-DIM) devices
are simultaneously supported in MP mode.
Toolbox Slave mode:
In Toolbox Slave mode, TouchPanel only functions as a DALI/Digidim control panel. Lighting
system configuration is not possible. Screens and objects can be added and configured. Editing
TouchPanel Schedules, Sequences and Cycles is also possible. Other device configuration must be done
via Toolbox or in MP mode.
Workshop Slave mode:
In Workshop Slave mode, TouchPanel only functions as a scene recall panel. Lighting system
configuration is not possible. Screens and objects can be added and configured. Editing TouchPanel
Schedules, Sequences and Cycles is also possible. Other device configuration must be done via
Workshop.
Designer Slave mode:
In Designer Slave mode, TouchPanel only acts in conjunction with physical or virtual button panels.
Lighting system configuration is not possible. Screens and objects can be added and configured. Editing
Local Schedules is also possible. Other device configuration must be done via Designer.
8
Helvar 924 LCD TouchPanel: Installation and User Guide
www.helvar.com
Advertisement
Table of Contents
