Table of Contents
Advertisement
8.10 Mapping Keys
It is possible to map the TouchPanel addresses and keys to mirror the Designer software to emulate key
presses. Please see RS232 AV Interface to 910/920 Router User Guide (D004457) for further information.
Map the addresses via the Screens menu as opposed to at button level.
This is because all address edits made at screen level will apply to the lower button level – meaning you will
only have to set the address once for all TouchPanel buttons. See 8.3 for further information.
To map the addresses:
1. From
Main Menu select the following:
2.
to select Screens Menu.
3.
to display Pop Up Menu.
4.
to enter Properties mode. Select the screen for which you want to view information.
5.
to select Group Address block.
6.
to select your chosen address.
7.
to save the changes.
All TouchPanel buttons will now have the same address for the selected scene.
To map individual keys:
8. From
Main Menu select the following:
9.
to display Pop Up Menu.
10.
to enter Properties Mode.
11. Select the button you wish to change the key settings.
12.
to change the Button function.
13.
to select the individual key number.
14.
to save the changes.
30
Helvar 924 LCD TouchPanel: Installation and User Guide
www.helvar.com
Advertisement
Table of Contents
