•
Loosen the locking knob of the bowl fluid
head
(Not Included)
•
Now, mount the fluid head on the Tripod
Stand.
•
Tighten the locking knob to secure the fluid
head.
•
Press the yellow locking lever of the fluid head
to unlock it.
•
After unlocking the yellow locking lever,
remove the top plate of the fluid head and
attach it to the Camera
matching the threads.
•
Secure the top plate and the Camera
(Not Included)
using a screwdriver.
•
Now, mount the Camera
fluid head and properly lock it.
NOTE: The assembly of the whole setup is quick
and tool-less, saving you valuable production
time.
•
Tripod Stand works efficiently with compatible
devices such as Sliders, Jibs, and Geared
Heads with its 150mm bowl base.
and remove it.
(Not Included)
(Not Included)
on the
by
5