Aluminum Spreader Setup
•
Extend the Spreader on the floor and loosen
all three knobs.
NOTE: The Spreader attaches to the spiked legs
of the spreader to provide precise customization
of the tripod's length and stability.
•
After loosening the knobs, extend the
Spreader per your requirement.
•
You can lock the position using the locking
knobs present on each arm.
NOTE: The arms of the Spreader can easily
telescope out from 41cm/16" to 66cm/26"
radius, offering a broader footprint to create a
secure and steady base for the tripod.
Extendable adjustment via the provided locking knobs of Spreader
2