Table of Contents
Advertisement
Q12: What do I do if the extruder makes a chugging noise, but no filament is extruded?
A12: Check to see if filament is loaded properly and that the guide tube is seated properly.
If filament is loaded and guide tube is seated properly, the nozzle is probably clogged.
Perform the steps in the
Q13: What is the difference between Filament Load and Filament Replace?
A13: Loading is performed when no filament is currently loaded. Replacing is a two-step
process that first unloaded the currently loaded filament, then loads another filament.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
during regular business hours, 7 days a week. You can also get assistance through email by
sending a message to tech@monoprice.com
CLEARING A CLOGGED NOZZLE
41
section above.
Advertisement
Table of Contents
