Monoprice Voxel 33820 User Manual page 18

Touch the Status icon to enter the Status Screen.
Touch the Language icon to enter the Language Menu.
Touch the Calibration icon to enter the Calibration Screen.
Touch the Home icon to move extruder and build platform back to the mechanical
zero point.
Touch the Move icon to enter the Move Screen.
Touch the Camera icon to enter the Camera Screen.
Touch the FilamentCheck icon to turn filament checking on or off.
Touch the Led icon to turn the internal illumination on or off.
Touch the Buzzer icon to turn the Warning Chimes on or off. The Warning Chimes
will sound whenever the printer has completed its given task and is ready for
input from you.
Touch the FactoryReset icon to enter the Factory Setting Screen.
Touch the Update icon to update the firmware. Follow the on screen instructions.
18