Technical Support - Monoprice MP Voxel Pro User Manual

7. Perform a full Nine Point Auto Calibration with the new nozzle. Refer to the
INTERFACE > Calibration
8. Change the Temperature Offset to match the requirements of the new nozzle, as
shown on the bag that the new nozzle was shipped. Refer to the
Change Extruder
9. Load some filament. Refer to the
details on how to load filament.

TECHNICAL SUPPORT

Monoprice™ is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
or through email by sending a message to tech@monoprice.com. Check the website for
support times and links.
To download the latest drivers, firmware, manuals, etc., go to www.monoprice.com and
type the P/N into the search bar. If available, support files are linked at the bottom of the
product page.
section above for details on how to perform a calibration.
section above for details about setting the Temperature Offset.
USER INTERFACE > Filament
32
USER
USER INTERFACE >
section above for