Monoprice Mini Delta V2 Quick Start Manual

Hide thumbs Also See for Mini Delta V2:

MP Mini Delta V2 3D Printer

1. Unbox the printer. Refer to the

and verify that all you received all parts and accessories.

2. Using a pair of scissors or wire cutters, remove the security straps from the printer's

Carriage. Lift the Carriage, then remove the protective carton shell.

P/N 21666

Quick Start Guide

PACKAGE CONTENTS

section of the User's Manual

Table of Contents

Do you have a question about the Mini Delta V2 and is the answer not in the manual?

Page 1 MP Mini Delta V2 3D Printer P/N 21666 Quick Start Guide PACKAGE CONTENTS 1. Unbox the printer. Refer to the section of the User's Manual and verify that all you received all parts and accessories. 2. Using a pair of scissors or wire cutters, remove the security straps from the printer's...
Page 2 3. Locate the two vertical slots on the side, then install the Filament Holder and place the sample filament on the holder. Press down on the lever on the Filament Extruder Gear, then feed filament into the hole until you encounter resistance. Release the lever.
Page 3 6. Download and install the free PoloPrint Pro app from the App Store® or Google Play™. PoloPrint Pro will allow you to control the printer using your smartphone or tablet.
Page 4 Otherwise, touch the Quit option to exit to the main menu screen. Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc. Wi-Fi® and Wi-Fi Alliance® are registered trademarks of Wi-Fi Alliance.

21666