Using The Camera With Polarcloud - Monoprice Voxel 33820 User Manual

When the camera is on, a camera icon will appear in the status bar, as shown in the image
below and to the left. When the USB port is activated and a USB drive has been
successfully connected, a USB disk icon will appear in the status bar, as shown in the image
below and to the right.
Note that if you want to view the video and images from the camera using a web browser,
the printer and the local computer must be part of the same network (connected to the
same router).

Using the Camera with PolarCloud

You can view the video and images from the camera by connecting to PolarCloud, which
allows you to monitor the print from any location. Perform the following steps to use the
camera with PolarCloud.
1. If you have not done so already, register an account with PolarCloud. Enter
www.polar3D.com in your web browser, then click the Sign Up button and follow
the on-screen instructions to register your account.
33