Table of Contents
Advertisement
Q6: What do I do if the distance between the nozzle and the build platform is too much
or too little?
A6: Perform the steps in the
Q7: Is the printer compatible with AC voltages other than 110-120 VAC?
A7: Yes, the printer uses an AC power adapter, which can accept voltages from 100~240
VAC, 50/60 Hz.
Q8: Can the printer automatically turn off after a print job is complete?
A8: No.
Q9: Which file formats does the printer support?
A9: The slicing software can accept .3mf, .stl, .obj, .fpp, .bmp, .png, .jpg, and .jpeg files. The
printer itself can accept .gx or .g files, which are created by the slicing software.
Q10: Is ABS printing safe?
A10: ABS filament creates a noxious, poisonous gas when heated. Only use ABS filament in
a well-ventilated location. We recommend using non-toxic PLA when printing in the
presence of children.
Q11: What do I do if the printed model edges are warped?
A11: Activate the Raft option in the slicing software, then reslice the model. Try heating
the platform to the recommended temperature to increase model adhesion. Try
applying a solid glue to the platform before printing.
CALIBRATION
section above.
40
Advertisement
Table of Contents
