Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Monoprice Delta Pro
Summary of Contents for Monoprice Delta Pro
- Page 1 Monoprice Delta Pro 3D Printer User's Manual...
- Page 2 Thank you, and congratulations on your purchase of the Monoprice Delta Pro 3D printer! The Delta Pro is a world-class desktop machine designed for speed, precision, and reliability. We know you’ll love printing your designs on the Delta Pro, but before you do, please read the manual thoroughly.
-
Page 3: Table Of Contents
MONOPRICE DELTA PRO MANUAL CONTENTS SAFETY WARNINGS AND GUIDELINES CALIBRATING THE PRINTER Calibrating Dimensional Accuracy P.10 CUSTOMER SERVICE PID Tuning P.10 CONNECTING TO WI-FI P.11 PACKAGE CONTENTS CUSTOMIZING THE UI SOFTWARE INSTALLATION AND SETUP P.11 PREPARING TO PRINT UPDATING THE FIRMWARE P.12... -
Page 4: Safety Warnings And Guidelines
SAFETY WARNINGS AND GUIDELINES Safety Warnings and Guidelines near the device. If moisture does get in or on the device, immediately unplug it from the power outlet and allow it to 1. Be careful not to damage the glass build plate. fully dry before reapplying power. -
Page 5: Customer Service
Software Installation and Setup The Monoprice Customer Service department is dedicated to We recommend using KISSlicer for use with the Delta Pro. Please ensuring that your ordering, purchasing, and delivery experience visit the Delta Pro page of monoprice.com to download KISSlicer is second to none. -
Page 6: Preparing To Print
PREPARING TO PRINT Auto-Leveling 3. On the LCD screen, tap > > Auto Leveling Before your first print, and anytime you remove the build plate, you’ll want to run an auto-level to ensure that your parts adhere well to the glass. Follow the procedure below to run an auto-level and calibrate the Z-offset of your machine. -
Page 7: Cleaning The Build Plate
PREPARING TO PRINT Loading Filament 3. Tap the in the center of the circle. 1. Place the filament spool on the holder so that the working end of the filament hangs down to the right. 2. Cut the end of the filament at an angle as illustrated. -
Page 8: Unloading Filament
6. On the LCD screen, preheat the nozzle to the material’s working temperature e.g. for PLA, ≈200°C. The Delta Pro’s hotend is easily swappable so you can print with different materials at different temperatures. While we always 7. Once the nozzle is up to temperature, tap >... -
Page 9: General Slicer Settings
OK and then tap Yes to begin printing. • Bottom, Top, and Perimeter: 30 mm/s • Loops and Infill: 60 mm/s • Travel: 100 mm/s • Z-speed: 50 mm/s • Max Acceleration: 1000 mm/s • For G-code pre-, and postfixes, visit the Delta Pro webpage... -
Page 10: Calibrating The Printer
Follow the steps settings. below to run an auto-PID tune. 1. Go to the Delta Pro page at Monoprice.com and download the Note: The tuning process will vary slightly depending on the calibration box G-code. -
Page 11: Connecting To Wi-Fi
For details and a link to download the mobile app, 3. Try preheating to your desired target temperature. please visit the Delta Pro webpage. To connect the Delta Pro to Wi-Fi, place the machine in a room with or nearby a Wi-Fi router. On the LCD screen, tap >... -
Page 12: Customizing The Ui
CUSTOMIZING THE UI Customizing the UI Maximum Temperatures The Delta Pro’s touchscreen LCD UI can be customized to your By default, the maximum temperatures allowed by the firmware preferences in the following categories. are set to the maximum safe operating temperature of the PTFE- Changing the Color lined hotend, 260°C. -
Page 13: Updating The Firmware
Please follow these care and version. Monoprice will release updates to the Delta Pro’s maintenance guidelines for each component of your machine. firmware from time to time on the Delta Pro’s webpage. Once • Clean the machine’s frame with a damp, lint-free cloth. -
Page 14: Regulatory
Changes or modifications not expressly approved by the party Any changes or modification to said product not expressly responsible for compliance could void the user's authority to approved by Monoprice, including the use of non-approved operate the equipment. antennas, could void the user’s authority to operate this device. - Page 16 Address Customer Service 11701 6th Street support@monoprice.com Rancho Cucamonga, CA 91730, USA tech@monoprice.com Call Us Legal Tel: 877.271.2592 Fax: 909.989.0078 legal@monoprice.com...