The Moh Application; Additional Troubleshooting Information - Sun Microsystems Netra CT 820 Administration Manual

The MOH Application

The MOH collects information about individual field replaceable units (FRUs) in
your system and monitors their operational status. MOH can also monitor certain
daemons; for example, if you installed the Netra High Availability Suite, MOH
monitors daemons through that application.
Starting and Stopping MOH
If you installed the Solaris patches for MOH in a directory other than the default
directory, specify that path instead. You must start the MOH application as root.
# cd /opt/SUNWnetract/mgmt3.0/bin
# ./ctmgx start [option]
Refer to
# cd /opt/SUNWnetract/mgmt3.0/bin
# ./ctmgx stop
Once MOH is running, it interfaces with your SNMP or RMI application to discover
network elements, monitor the system, and provide status messages. Refer to the
Netra CT Server Software Developer's Guide for information on writing applications to
interface with the MOH application.

Additional Troubleshooting Information

In the event of an active distributed management card fault, hot swap is not
supported.
For additional troubleshooting information, refer to the Netra CT Server Service
Manual.
66 Netra CT 820 Server System Administration Guide • March 2004
for the options available with
TABLE 2-4
.
ctmgx start