Pairing The Keypad - Teledyne JCU-3 Installation & Operation Instructions

6. In the Layout section, click the Orientation list, and select Landscape.
7. Click Save Ini to save the orientation setting.
A dialog confirms that your changes have been saved.
8. Click the Logout button at the top-right of the page, then close your
web browser.

11.2 Pairing the keypad

Each JCU-3 keypad can be paired with multiple thermal cameras, and each
thermal camera can be paired to multiple keypads.
Note:
Pairing the keypad to a thermal camera requires a PC, laptop – or other
IP-network compatible device that supports a web browser – to be
connected to the same network as the camera and keypad.
You complete the pairing process using web pages served by the JCU-3
keypad.
1. Make sure that your PC/laptop is configured to detect UPnP devices.
For example, in Windows 7, 8, and 10, within the [Network and Sharing
Center], you'll need to select the option to [Turn on network discovery].
2. The keypad is automatically added to the list of devices on your
PC/laptop, and is named according to the keypad part number, and serial
number (for example: A80510 0123456).
In Windows XP, the keypad is listed in Windows Explorer under "My
Network Places"; in later versions of Windows, the keypad is listed in
Windows Explorer under "Network".
Operation
3. For Windows computers, double-click the keypad item to open the
keypad's web page. You can also right-click the keypad item and select
[Properties], to show more information about the keypad, including its
IP address.
The login screen with a picture of the JCU-3 is displayed.
4. Enter "user" for Username and "user" for Password, then click [Login].
The JCU configuration page is displayed.
39