Fitting The Keypad Mat - Teledyne JCU-3 Installation & Operation Instructions

8.5 Fitting the keypad mat

Your keypad can be installed in portrait or landscape orientation. Keypad
mats are available for each orientation.
• You should fit the keypad mat that matches your chosen mounting
orientation.
• You should only fit the keypad mat after the unit has been secured to
the mounting surface.
1. Ensure the keypad mat is orientated correctly.
2. Slide the keypad mat's shorter edge, with the 2 locking tabs, into the end
of the keypad that has 2 notches to accept the tabs.
Mounting
3. Close the opposite end of the keypad mat into the keypad, ensuring that
the tab slides into the notch provided. Push all of the tabs on the longer
sides into their notches (you should hear a click as each tab engages).
27