Tools Required; Removing The Keypad Mat - Teledyne JCU-3 Installation & Operation Instructions

8.1 Tools required

Product installation requires the following tools:
1. Power drill
2. Pozidrive screwdriver
3. Drill bit
Note:
The appropriate drill bit size is dependent on the thickness and material of
the mounting surface.
24

8.2 Removing the keypad mat

To gain access to the mounting hole locations, the keypad mat must be
removed.
Note:
To help prevent scratching the product, cover the tip of your screwdriver
blade with a small piece of insulation tape.
1. Using a thin, flat bladed screwdriver insert the tip of the screwdriver into
the gap between the edge of the keypad mat and the keypad housing, at
a location between locking tabs.
2. Gently lever the keypad mat away from the keypad to release the keypad
mat.
Take care not to bend the keypad mat during removal.