Single Jcu-3 Keypad With Single Camera And Analog Video Monitor - Teledyne JCU-3 Installation & Operation Instructions

Item Description
7 Right-angled RayNet (Ethernet) to RayNet (Ethernet) cable
3 m (9.8 ft.)
8 RayNet (Ethernet) to RJ45 cable
9 PoE injector (provides power to JCU-3)
Single JCU-3 keypad with single camera and analog
video monitor
Note:
For relevant power connection information, refer to the instructions which
accompany each device.
30
Note:
A PC, laptop – or other IP-capable device that can run a web browser –
is required to pair the keypad to the camera. This is not shown in this
illustration, and could be removed from the system after the pairing
process is complete.
Item Description
1 M100 / M200–Series camera
2 Analog video monitor
3 Joystick control unit (JCU-3)
4 Ethernet network switch
5 IP video decoder
6 RayNet (Ethernet) to RJ45 adapter cable (100 mm)
7 Right-angled RayNet (Ethernet) to RayNet (Ethernet) cable
(10 m)
8 RJ45 to RJ45 Ethernet cable
9 RayNet (Ethernet) to RJ45 cable
10
BNC to BNC video cable
11
PoE injector (provides power to JCU-3)