What To Do If; Installation - Electrolux Oven EOB53000 User Manual

2. Pull the door trim to the front to remove
it.

WHAT TO DO IF...

Warning! Refer to "Safety information"
chapter.
Problem
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven does not heat up
The oven lamp does not operate The oven lamp is defective
Steam and condensation settle
on the food and in the oven cav-
ity
The display shows "12.00"
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

INSTALLATION

Warning! Refer to "Safety information"
chapter.
3. Hold the door glass panels on their top
4. Clean the door glass panels.
Possible cause
The oven is not switched on
The clock is not set
The necessary settings are not
set
The fuse in the fuse box is re-
leased
You left the dish in the oven for
too long
A power cut
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the oven cavity.
Important! The built-in unit must meet the
stability requirements of DIN 68930.
edge one by one and pull them up-
wards out of the guide
To install panels follow the procedure in
reverse. Insert the smaller panel first,
then the larger.
Switch on the oven
Set the clock
Control the settings
Control the fuse. If the fuse is re-
leased more than one time, re-
fer to a qualified electrician.
Replace the oven lamp
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
Reset the clock
.........................................
.........................................
.........................................
electrolux 19
Remedy