Steamer Cover; Scent Basins - Sawo SAVONIA COMBI SAVC-90NS Manual

2.1.2 Steamer Cover

• Follow the instructions given in Figure 2 in attaching or detaching the Steamer Cover
Fig. 2 Steamer Cover
Attach the Steamer Cover as shown:
Savonia Combi
1.
Securely attach the
Steamer Cover on the
top of the Water Tank.
Super Savonia Combi
1.
Securely attach the
Steamer Cover on the
top of the Water Tank.

2.1.3. Scent Basins

• There are designated holes for the Scent Basins on the Steamer Cover. The Scent Basins are to be
fitted on these holes as per Figure 3.
• Scent Basins should be handled with care as they might break if dropped on the floor or on any
hard surface.
Fig. 3 Scent Basins
Savonia Combi
2.
Push the Steamer Cover down
3.
Make sure that the Steamer
Cover is pushed down below the
frame.
Frame
4.
Then slide the Steamer Cover inward.
2.
Push the Steamer Cover down
3.
Make sure that the Steamer
Cover is pushed down below
the frame.
Frame
4.
Then slide the Steamer Cover inward.
Detach the Steamer Cover as shown:
1.
Lift the Steamer
Cover up.
Frame
2.
Push it down.
3.
Then pull it out.
2.
Push it down.
3.
Then pull it out.
1.
Lift the Steamer
Cover up.
Scent Basins
Super Savonia Combi
4