Table of Contents
Advertisement
Quick Links
manufactured by:
manufactured by:
www.sawo.com
sawo@sawo.com
Subject to change without notice.
SCANDIA
COMBI
MANUAL
SCAC-60NSF
SCAC-80NSF
Congratulations on your purchase of a SAWO heater/steam generator.
Please read the manual carefully before using the product.
ELECTRIC
SAUNA
HEATER /
STEAM
GENERATOR
SCAC-90NSF
Heating Elements
Scent Basins
Watertank
Fiber Coating
Water Level Indicator
Serial Number
Three Phase Connection
ENGLISH
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sawo SCANDIA COMBI SCAC-60NSF
Summary of Contents for Sawo SCANDIA COMBI SCAC-60NSF
- Page 1 SCANDIA COMBI MANUAL SCAC-60NSF SCAC-80NSF SCAC-90NSF Congratulations on your purchase of a SAWO heater/steam generator. Please read the manual carefully before using the product. Heating Elements Scent Basins Watertank Fiber Coating Water Level Indicator Serial Number ELECTRIC manufactured by: manufactured by:...
-
Page 2: Sauna Stones
1. Instructions for use 1.1. Sauna Stones Never use the heater without stones as it may cause a fire. Only the original Sawo or Peri Rocks Fig. 10 Scandia combi spare parts are recommended. Do not use ordinary stones.They do not possess good heating capacity, easily break and may emit harmful substances. -
Page 3: Spare Parts
1.2. Heating of the Sauna, normal sauna 8. Spare parts Before you switch the combi heater on check always that there aren’t any things over the combi heater or in the near distance of the heater. See item 1.8. (Warnings). When the combi heater is switched on for the first time, both the combi heater and the stones emit smell.To remove the smell, the sauna room needs to be efficiently ventilated. -
Page 4: Steam Generator
1.3. Steam Generator 7. Attaching Scent Basins The combi heater includes a steam generator to produce steam inside the sauna room.The steam generator has a 5 litres tank which produces steam for about 1hour 30 minutes (with 5 litres of water) with setting MAX on the external control unit . -
Page 5: Troubleshooting
5. Troubleshooting 1.3.4. Cleaning the water reservoir Impurities from water, e.g. lime, will accumulate on the walls of the steam generator's water If the steam generator doesn't work, check the following: reservoir. For decalcification we recommend decalcifying agents intended for household •... -
Page 6: Electrical Connections
1.7.1. Temperature and Humidity of the Sauna Room 3.6. Electrical Connections Both thermometers and hygrometers suitable for use in a sauna are available. As the effect of steam on people varies, it is impossible to give an exact, universally applicable bathing The combi heater may only be connected to the electrical network in accordance with temperature or percentage of moisture.The bather’s own comfort is the best guide. -
Page 7: Sauna Room Floor
2.1.1. Blackening of the sauna walls Wooden material in a sauna, such as panels, blackens with age.The blackening process is Fig. 5 sped up by sunlight and the heat from the stove. If the wall surfaces have been processed with protective panel agents, the blackening of the surface of the wall above the stove can Electrical connections be seen quite quickly depending on the protective agent used.The blackening is due to the fact that the protective agents have less resistance to heat than unprocessed wood do.This... -
Page 8: Ventilation Of The Sauna Room
2.4. Ventilation of the Sauna Room 3. Installation Sufficient ventilation is extremely important for the sauna.The air in the sauna room should be It is recommended that the combi heater is placed on the wall nearest to the door. The air changed six times per hour.The fresh air pipe should come directly from outside.
Need help?
Do you have a question about the SCANDIA COMBI SCAC-60NSF and is the answer not in the manual?
Questions and answers