Assembly And Installation Instructions; Assembly; Ball Valve - Sawo SAVONIA COMBI SAVC-90NS Manual

2. Assembly and Installation Instructions

2.1.

Assembly

2.1.1 Ball Valve

• Before installing the Ball Valve, ensure that the Drainage Pipe's thread is wrapped with a Teflon
tape
• When attaching and detaching the Ball Valve, make sure that the valve's handle is in the "close"
position.(see figure 1a)
Note: For Built-in Automatic Refill System Ball Valve is already attached to the heater. Only the Water
Inlet connection will be attached by the user. See Figure 1b..
Fig. 1a Ball Valve (Manual Refill)
Ball Valve in "close" position of Savonia Combi
Fig. 1b Ball Valve (Automatic Refill)
Water Inlet
From overflow
hole of the tank
3
Drainage Pipe
Drain Valve
Ball Valve in "close" position of Super Savonia Combi
Super Savonia Combi
Water Inlet
From overflow
hole of the tank
Drain Valve
Connecting Hose