Repairing the Recording Media
It is necessary to restore the recording media if an
abnormality occurs to the data in the recording
media due to some reasons.
Memo :
[!RESTORE] appears in the remaining level
0
display area when a recording media that
requires repair is inserted.
1 Select [System] B [Media] B [Restore
Media].
(A P157 [ Restore Media ] )
2 Select the recording media to be restored
and press the [STATUS/SET] button (R).
.
3 Restoring starts.
Restoring...
.
52
Recording Media
4 Restoring is complete.
When restoring is complete, "Complete"
0
appears and the camera recorder returns to the
[Restore Media] screen.
When no media that requires restoring is
0
inserted, the camera recorder returns to the
[Media] menu screen.
Caution :
[Restore Media] can only be selected in Camera
0
mode. However, it cannot be selected while the
camera recorder is recording. Select [Restore
Media] in Camera mode when the camera
recorder is not recording.
[Restore Media] does not restore the recording
0
media to its original states completely. If
restoring fails, replace or format the recording
media. Take note that formatting erases all the
2
information inside the recording media.
Restoring cannot be performed in the following
0
cases.
Camera recorder is recording in progress.
0
Recording media is not inserted.
0
Write-protect switch of the SD card is set (z
0
is displayed).